GOODA DHDS-2000
CNC Deep Hole Drilling Machine
High Speed Gun Drilling ,Spot Facing ,ans drilling
GOODA CNC Three axis gun drilling machine suitable for drill straight hole, taper hole, blind hole,through hole, step hole and so on.
This machinery is used for drilling the coordinate holes on the job.
| X axis |
drive job move in horizontally,roller linear guide rail. CNC control. |
| Y axis |
drive job move in vertically,roller linear guide rail. CNC control. Block balanced. |
| Z axis |
drive cutting tool infeeding,roller linear guide rail,CNC control. W axis:Control the distance between pillar and working table;double rectangle slide guide rail. |
| CNC control |
| A axis |
Control the cutting tool swing angle;slide guiding rail,close loop control. |
| B axis |
control the job index,CNC control. |
| Drill box |
main spindle maxiumum speed 6000r/min,single spindle structure. |
| CNC controller |
FANUC/SIEMENS
| Technical parameters |
Parameters |
| Model |
DHDS-2000 |
| Working capacity |
Gun drilling diameter range |
Φ3~Φ35 mm |
| Hole drilling max. depth |
1500 mm |
| Main spindle taper hole |
BT40 |
| Machine character |
Z Axis |
Infeed speed range |
1~3000 mm/min |
| Rapid movement speed |
8 m/min |
| Infeed motor torque |
12 Nm |
| W Axis |
Rapid movement speed |
3000 mm/min |
| Traval stroke |
1000 mm |
| Motor torque |
30 Nm |
| Positioning/repeat positioning accuracy |
±0.02mm/±0.015mm |
| X Axis |
Rapid movement speed |
5 m/min |
| Traval stoke |
2000 mm |
| Motor torque |
30 Nm |
| Positioning/repeat positioning accuracy |
±0.02mm/±0.015mm |
| Y Axis |
Rapid movement speed |
5 m/min |
| Traval stoke |
1000 mm |
| Motor torque |
22 Nm |
| Positioning/repeat positioning accuracy |
±0.02mm/±0.015 mm |
| A Axis |
Swing range |
Clock direction 16°,counter clock direction26° |
| Motor torque |
22 Nm |
| B Axis |
Working table dimension |
2 m×1.8 m |
| working table loading capacity |
15 tons |
| Setting Min.Index unit |
0.001° |
| Motor torque |
40 Nm |
| Drill box |
Max. rotating speed |
6000 r/min |
| Motor power |
11 KW |
| Others |
Max.drill L-D ratio |
100:1 |
| Machine general powr(roughly) |
77 KW |
| Coolant system |
Max.pressure |
10 MPa |
| Max.flow |
100 L/min |
| Filtering accuracy |
20 μm
|
|
*Design & specifications are subject to change without proor notice!
